Sharp Vertical Knee Mills
REQUEST QUOTE
Sharp Vertical Knee Mills
SHARP Industries is the first to improve upon the original design of this popular mill to include features such as Double Nut Backlash Eliminator, and Supporting Bearing at the bottom of motor shaft. Models of different sizes are available.
Models
CAPACITY |
LMV-42 |
LMV-50 |
LMV-49-DVS |
TMV |
TMV-1 |
TMV-DVS |
V-1 |
| Table Size | 9 x 42 in. | 9 x 50 in. | 9 x 49 in. | 10 x 54 in. | 10 x 54 in. | 10 x 54 in. | 12 x 58 in. |
| T-slots (No., Size, Pitch) | 3, 5/8, 2.5 in. | 3, 5/8, 2.5 in. | 3, 5/8, 2.5 in. | 3, 5/8, 2.5 in. | 3, 5/8, 2.5 in. | 3 slots, 5/8 in. | 3, 5/8, 2.5 in. |
| Table Travel : X Longitudinal | 30 in. | 37 in. | 36.6 in. | 39 in. | 39 in. | 39 in. | 40 in. |
| Table travel : Y Cross | 12 in. | 12 in. | 12 in. | 16.3 in. | 16.3 in. | 16.3 in. | 16 in. |
| Quill travel: Z Vertical | 5 in. | 5 in. | 5 in. | 5 in. | 5 in. | 5 in. | 5 in. |
| Ram Travel | 12 in. | 12 in. | 16 in. | 18.5 in. | 18.5 in. | 18.5 in. | 16 in. |
| Knee travel : Vertical | 16 in. | 16 in. | 12 in. | 15.3 in. | 15.3 in. | 15.3 in. | 17.8 in |
| Spindle Center to Column | 6.75 – 18.5 in. | 6.75-18.5 in. | 6.75 – 18.5 in. | 9.8 – 28.3 in. | 9.8 – 28.3 in. | 5.37-16.9 in. | 2-18 in. |
Standard Accessories
- One Shot Lube System
- Hard-Chromed Ways
- Front and Rear Rubber Way Covers
- Tool box with tools
- Wired 220V or 440V.
Optional Accessories
- Auto Lube Pump with 2 Adjustments
- “Sharp” Power Table Feed with Safety Handle
- “Sharp” Power Cross Feed with Safety Handle
- “Sharp” Power Knee Feed with Safety Handle
- 6 ins “Kurt” Vise with Swivel Base
- Right Angle Milling Attachment with Arbor
- Drill Chuck & Drill Arbor
- 6 in. Riser Block
- Coolant System with Chip Pan (pump included
- “Maxi Torque Rite” Power Draw Bar Clamping Kit (52 pcs/Steel Rack)
- Halogen Work light
- CE mark
- 380V and 575V transformer
- UL components upgrade with electrical box
- UL compliance certificate under State of California
- Digital Readout System