Tie Down Anchors
REQUEST QUOTE
Tie Down Anchors
We specialize in the manufacture and installation of recessed in ground tie down anchors for securing items that can be blown away, stolen or moved.
Made of 100% stainless steel, with a 4,200 lb tensile strength that will not rust or corrode. Pull out strength varies according to ground conditions. An engineer should determine the proper anchor length requirements. The ring and cup holder are the same for all lengths. The cup holder is approximately 4.25” long, 2.25” wide and 5/8” deep with a 1-1/2” ID ring. The ring rotates or pivots from side to side when being used. The removable, heavy duty stainless steel cover inserts into the base and fastens tight for a flush mount when the tie down is not in use, allowing walking, driving, sweeping or snow plowing over the top.
We will custom build anchors to your specifications. |
|
The 4” anchor is to be embedded in fresh poured concrete slabs only. The other lengths are installed in concrete, asphalt or turf by auguring an 8” hole at least 6” deeper than the anchor length, fill with concrete, embed the anchor within and finish to grade.
|
| Part Number | Work Load | Breaking Strength | Length | Weight | Description |
| AN1004 | 500# | 1,000# | 4″ | 1# | 1.5″ ID Welded Ring |
| AN1022 | 500# | 1,000# | 22″ | 1.5# | 1.5″ ID Welded Ring |
| AN2004 | 2,000# | 9,700# | 4″ | 1# | 1.25″ ID Weldless Ring |
| AN2022 | 2,000# | 9,700# | 22″ | 1.5# | 1.25″ ID Weldless Ring |
| AN3500 | 3,500# | 15,200# | 22″ | 3.0# | 1.25″ ID Weldless Ring |
| AN5000 | 5,000# | 36,700# | 24″ | 6# | 2.5″ ID Weldless Ring |
| AN7500 | 7,500# | 45,000# | 30″ | 13# | 2.25″ ID Weldless Ring |
| AN10000 | 10,000# | 55,000# | 31″ | 10# | 2.75″ ID Weldless Ring |
| AN20000 | 20,000# | 97,000# | 35″ | 32# | 3.0″ ID Weldless Ring |
| AN30000 | 30,000# | 145,000# | 44″ | 45# | 3.0″ ID Weldless Ring |
| ANC204 | 2,000# | 9,700# | 4″ | 2# | 1.25″ ID Weldless Ring |
| ANC222 | 2,000# | 9,700# | 22″ | 3# | 1.25″ ID Weldless Ring |
| ANC322 | 3,000# | 15,200# | 22″ | 4# | 1.25″ ID Weldless Ring |
| ANC522 | 5,000# | 36,700# | 22″ | 5# | 2.5″ ID Weldless Ring |
| ANC7500 | 7,500# | 45,000# | 30″ | 13# | 2.5″ ID Weldless Ring |
| ANC10000 | 10,000# | 55,000# | 31″ | 8# | 2.75″ ID Weldless Ring |
| BL3500 | 3,500# | 19,500# | 22″ | 12# | 1.5″ ID Weldless Ring |
| BL5000 | 5,000# | 40,500# | 26″ | 18# | 1.5″ ID Weldless Rind |
| BLC3500 | 3,500# | 19,500# | 22″ | 10# | Paver deck design |
| BLC5000 | 5,000# | 40,500# | 24″ | 14# | Paver deck design |
| HK5000 | 5,000# | 40,500# | 40″ | 10# | 2″ ID Weldless Hook |
| HK10000 | 10,000# | 55,000# | 30″ | 14# | 2.5″ ID Weldless Hook |
| HK20000 | 20,000# | 100,000# | 40″ | 32# | 3″ ID Weldless Hook |
| HK25000 | 25,000# | 125,000# | 53″ | 40# | 3.5″ ID Weldless Hook |
| HK30000 | 30,000# | 150,000# | 49″ | 75# | 3″ ID Weldless Hook |
| HK40000 | 40,000# | 200,000# | 58″ | 115# | 4″ ID Weldless Hook |
| HK50000 | 50,000# | 225,000# | 60″ | 175# | 3.5″ ID Weldless Hook |