Standard Industrial AM Straight Side Press

REQUEST QUOTE

Reviews

Be the first to review “Standard Industrial AM Straight Side Press”

Your email address will not be published. Required fields are marked *

Standard Industrial AM Straight Side Press

Model AM Straight Side Press

The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model AM also allows front to back off-center loading within +,- 6″ of the centerline of the bed. If off-center loading is required the entire front to back width of the bed then the model CM press should be considered. Contact the factory for details on the differences in these presses.

The model AM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses however has a smaller price tag than the extremely heavy duty CM style presses. The AM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model AM is designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The AM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

****100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

Model
Forming Tons
Punching Tons
Ram Size
Bed Size
Open Height
AM100-24-96
100 Tons
66 Tons
24 in
96 in
14 in
AM100-24-120
100 Tons
66 Tons
24 in
120 in
14 in
AM100-30-144
100 Tons
66 Tons
30 in
144 in
14 in
AM200-24-96
200 Tons
130 Tons
24 in
96 in
16 in
AM200-24-120
200 Tons
130 Tons
24 in
120 in
16 in
AM200-30-144
200 Tons
130 Tons
30 in
144 in
16 in
AM325-24-120
325 Tons
215 Tons
24 in
120 in
16 in
AM325-30-144
325 Tons
215 Tons
30 in
144 in
16 in
AM400-24-120
400 Tons
265 Tons
24 in
120 in
20 in
AM400-30-144
400 Tons 265 Tons 30 in 144 in 20 in
AM500-24-120
500 Tons 330 Tons 24 in 120 in 20 in
AM500-30-144
500 Tons 330 Tons 30 in 144 in 20 in

LITERATURE