Standard Industrial CM Straight Side Press

REQUEST QUOTE

Reviews

Be the first to review “Standard Industrial CM Straight Side Press”

Your email address will not be published. Required fields are marked *

Standard Industrial CM Straight Side Press

Model CM Straight Side Press

The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area.

The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke.

****100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.

Model
Forming Tons
Punching Tons
Ram Size
Bed Size
Open Height
CM100-48-96
100 Tons
66 Tons
48 in
96 in
14 in
CM100-48-120
100 Tons
66 Tons
48 in
120 in
14 in
CM100-48-144
100 Tons
66 Tons
48 in
144 in
14 in
CM200-48-96
200 Tons
130 Tons
48 in
96 in
16 in
CM200-48-120
200 Tons
130 Tons
48 in
120 in
16 in
CM200-48-144
200 Tons
130 Tons
48 in
144 in
16 in
CM300-48-120
300 Tons
200 Tons
48 in
120 in
16 in
CM300-48-144
300 Tons
200 Tons
48 in
144 in
16 in
CM400-48-120
400 Tons
265 Tons
48 in
120 in
20 in
CM400-48-144
400 Tons 265 Tons 48 in 144 in 20 in
CM500-48-120
500 Tons 330 Tons 48 in 120 in 20 in
CM500-48-144
500 Tons 330 Tons 48 in 144 in 20 in

 

LITERATURE