JATAS Machinery Sales, Inc. 
503 Frontage Ave. W - Underwood, MN 56586 
1-800-743-2435 / 1-218-826-6464 
 
   
 
 
 
 
 
AFT TABLE TOP BENDER 
 
VIDEO AVAILABLE ON REQUEST 
AIM’s programmable CNC steel wire & tube bending machines have revolutionized the engineering of wire bending. The AccuForm line of equipment not only increases productivity, they are simple to operate. Advanced servo technology enables the machines to operate at very high speeds without sacrificing accuracy and repeatability. 
AIM manufactures equipment organized by wire or tube size, as shown below: 
Size / Capacity
Metric (mm.)
S.A.E. (inch)
AFT-8
2.7 – 8.0
0.106” – 0.315”
AFT-12
2.7 – 12.0
0.106” – 0.472”
AFT-16
4.0 – 16.0
0.157” – 0.630”
The AFT line consists of components that are interchangeable within the same size. The major components that comprise the Accuform Table Top are as follows: 
1) Bender2) Feedera. 2Db. 3D3) Control Cabinet with SmartEditor® 
The AFT machines are designed for quick/small runs, prototyping and automated production with the available Hopper/Feeder Option. 
Programming is quick and easy, all you need is to enter the lengths and angles of your product, view the design, edit if necessary, and begin production! 
Standard feeding speeds exceed 15 meters per minute (50 feet/minute) and bending speeds exceed 600 degrees per second. The smallest resolution of the wire/tube feeder is 273 pulses per millimeter (6.93 pulses per thousandth of an inch) and the resolution of the bender is 1450 pulses per degree. The published accuracy of the servo controllers is ±1 pulse, the length accuracy is ±0.1 millimeter (±0.004?) and the angle accuracy is ±0.05 degrees. Accuracy and repeatability of AIM machines are exceptional, so the wire or tube forms produced will only be limited by the quality and consistency of the wire or tube supplied. 
Parabolic and S-curve positioning profile gives smoother acceleration and deceleration minimizing shape distortion while achieving higher speeds at the minimum possible power usage. Tooling drawings are available upon request. AIM customers can easily manufacture their own tools such as bending pins and all consumables. AIM machines have an excellent reputation of customer support and spare parts delivery. 
AIM uses robust engineering for long life and low maintenance. Using enclosed type brushless servomotors along with highest precision planetary gearboxes provides the best machine operation. All critical components have over-temperature, over-current, and over-voltage protection installed. All bearings are oversized and double-sealed for longer life expectancy and lower maintenance. The design of the AccuForm machines incorporates the maximum safety standards and life expectancy. 
All AFT machines are backed by a one-year parts and labor limited warranty. Excluded are the parts that “touch” the wire (such us bending pins), although all of these wear parts are made from the hardest tool steels and heat-treated to Rockwell scale 55°-65° degrees. 
Parts purchased from other manufacturers carry their own warranty (OEM-warranty). For example, the precision gearboxes made by ALPHA®, the world’s largest high-precision gearbox manufacturer, have a 5-year warranty. AIM always installs the best quality parts available and never sacrifices quality for price. Even after the warranty expires and within common sense rules, AIM provides technical support free of charge to the original owner. 
The newest Windows® XP Pro Version is standard. No extra fees or contract needed! You can also connect over your existing LAN through the Internet to review machine progress right at your office PC. 
Another AIM pioneering feature: “Dial-A-Service™” allows access to any machine worldwide. The customer simply connects the machine to a telephone line or an Internet gateway and the machine controller connects to AIM’s technical support department. Within minutes, diagnostics can be reviewed and initiated. 
Statistical analysis with the touch of a button – a standard SmartEditor® feature! Let the computer figure it out – production rates, times, shifts, days, and wire needed, to just mention a few capabilities. All the factors involved are parametric and can be customized to fit every need. Using the SmartEditor® Office version (available Option), you can use the “EZ-Quote” analysis from your office PC. Production statistics can be saved automatically, locally on the machine or on a network computer for review and analysis needed frequently on ISO 9000 quality analysis programs or the customer’s lean manufacturing system.
Contact JATAS